Search found 4 matches
Search found 4 matches • Page 1 of 1
On the chance that you do have a revolver with a "choked" barrel, one that is undersize in the frame thread area. You can fire lap it by applying the lapping compound at the rifling end of the forcing cone with a cotton swab. This will lab only the barrel portion and not the cylinder throats. I sugg...
Plumberroy, I know James of Dixie, he's a great guy. With your NEF 20ga, If you can get a good measurement of the groove dimension, this will help. Solid slugs give less pressure than that of a shot column. The reason is the shot acts as stemming and "wedges" against the bore. On a solid slug it sim...
- Sat Jun 06, 2009 7:08 pm
- Forum: revolvers
- Topic: 0.456" throats and 0.451" barrel
- Replies: 2
- Views: 7027
How do I lube with out sizing? Crudely. I pan lubed them and cut them out with a "cookie cutter" made from a nylon hose barb that was reamed with a tapered reamer ( not the best way as the nylon wants to give rather than cut, but it gives them a bit of release at the top) to just snug enough at the ...
- Thu Oct 16, 2008 2:24 pm
- Forum: General
- Topic: Let's see those cast bullet hunting pictures !
- Replies: 5
- Views: 11898
Great elk Dan and great picures too. Congratulations.