MM/RD 432-365GC

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 8:25 am

The Mountain Mold - Ranch Dog 432-365GC just arrived at the Orange PO and I just got it cleaned and ready , just waiting for the lead to become liquid !


Image

Image

Image

Kinda funny I had just finished putting everything away from casting earlier today !

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 10:25 am

Just finished casting 112 of the new bullets . Water quenched wheelweights !

Image

Image

Image

Now if I can get about 40 or so of them lubed sized and checked tonight and loaded with three or four different charges of H322 I might just hit the range tuesday early !

User avatar
mtngun
Site Admin
Posts: 1640
Joined: Fri Feb 01, 2008 5:45 pm
Location: Where the Salmon joins the Snake

Re: MM/RD 432-365GC

Post by mtngun » Mon Jun 08, 2015 10:57 am

6pt-sika wrote:Image
I like the concept of the anti-splatter shield around your casting station.

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 11:23 am

mtngun wrote:
6pt-sika wrote:Image
I like the concept of the anti-splatter shield around your casting station.
If I were at home I'd be outside . But here at the gunsmith shop in the air conditioning my desk and laptop are right behind that box . Molten lead splatters do not go well with a plastic PC keyboard :lol:

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 2:55 pm

Average for a dozen WW bullets was 356 grains . Average for twelve lubed sized checked was 365.4 grains . I size in a Buffalo Arms .433" die in a Lyman 4500 .

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 3:01 pm

I am getting ready to load some of these with H322 charges of 42 , 43 , 44 and 45 grains three rounds per charge .

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 5:30 pm

Pics of the product weights and finished product !

Image

Unlubed sized and checked bullet at 356 grains the actual average for 12 was 356 !

Image

Lubed sized and checked bullet the average of 12 was 365.4 grains .

Image

User avatar
mtngun
Site Admin
Posts: 1640
Joined: Fri Feb 01, 2008 5:45 pm
Location: Where the Salmon joins the Snake

Re: MM/RD 432-365GC

Post by mtngun » Mon Jun 08, 2015 7:37 pm

Thanks for the pics. :)

I hope your gun likes your design. :)

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Mon Jun 08, 2015 8:32 pm

mtngun wrote:Thanks for the pics. :)

I hope your gun likes your design. :)
Unless I'm not seeing something I don't forsee a problem getting it to shoot .

To be honest there have been very very few if any 44 cal home cast bullets that I've not been able to get to shoot well enough for my purposes out to say 150 or so yards . Now when I say for my purposes anything in the 2MOA neighborhood will do , granted I'd like it better but 2 MOA will giterdone . I don't think in the last five years I've killed an animal over 120 yards with a cast bullet and the vast majority were killed inside 60 yards . Each year I generally take 3-8 deer and or bear with cast .

6pt-sika
Posts: 149
Joined: Sat Jan 17, 2009 11:42 pm

Re: MM/RD 432-365GC

Post by 6pt-sika » Tue Jun 09, 2015 7:03 am

I just returned from the range .

The MM/RD 432-365GC bullet with H322 did very well and chronographed pretty decent considering it was in a 19" barrel .

Targets are posted in the order they were shot.

Image

Image

Image

Image

I think the two warmer loads are plenty good enough . But I'll try them again later this week or sometime next week .

Post Reply