I've been working on this project for awhile. It's juat a 4-5/8" Ruger Super Blackhawk with a Bisley grip frame, hammer, and trigger. The Ruger factory grip frames come oversized and pretty rough. I blended the 2 frames together with a mill smooth file, then 320 paper stuck on an aluminum plate with double stick tape, then gave the cylinder frame and grip frame a final finish with red scotch bright. The grips are from Jim Badger. Bullets are 44 cal 260 grain turncated cone cast from an iron mold Dan made for me a few years back. The rear sight blade is one from One Ragged Hole. The Jurry is still out on this sight. I'll have to shoot more with it to decide if I like it or not.
- 1014.jpg (95.9 KiB) Viewed 4052 times